Mywifi-ext

Netgear Router Firmware Update: How to Update it?

Netgear Wi-Fi routers have firmware that is used to configure and connect the router to other devices. The device’s behavior is entirely dependent on its firmware. Therefore, if a new firmware is released, the user must download it right away. Hence, the most recent firmware enhances the router’s reliability, usefulness, and performance. So, all users are advised to check the Netgear router firmware update procedure discussed here.

The users are suggested to follow the instructions for Netgear Firmware update and apply the same to make the most of the Netgear router. Therefore, after the user updates the firmware, the router’s performance will improve. So, look out for the steps provided here regarding Netgear Router Firmware Update. 

The users can update the router’s firmware through the official website. However, the users not familiar with the steps to update the firmware are advised to follow the below-mentioned steps to update the Netgear Router Firmware.

Netgear Router Firmware

Netgear Router Firmware Update Via Web Interface

The Web interface is the one-stop platform through which the users can access the router settings. Along with this, the users can configure the router settings and can update the firmware. Thus, follow the steps provided below to update the router’s firmware. Therefore, after updating the firmware, the router’s performance will improve, and the latest features will be added. So, scroll down and follow the steps below to update the router’s firmware.

  • Initially, the users are advised to connect the device with the Netgear router via an Ethernet cable.
  • After this, the users are recommended to open a web browser on a system or a mobile device.
  • Note: Make sure that the device or the system is connected to the router’s network.
  • Then, in the browser’s address bar, type the default Netgear’s web address, i.e., routerlogin.net.
  • After this, let the official website open.
  • Now the users will be asked to enter the login credentials, i.e., “username” and the “password.”
  • Note: If the user forgot the password, contact the professionals for the password recovery 
  • Then choose the “Administration” option.
  • Now from there, click on the “Firmware Update” option.
  • After this, the Netgear router will search for the latest firmware.
  • Now the users are recommended to click on the “Yes” option if the new firmware is available.

After completing these procedures, let the Netgear Router Firmware update correctly. Moreover, the users are recommended not to interrupt in between to reduce the risk of firmware corruption. However, if any user has a problem, they are recommended to contact the experts.

Update Firmware Manually

Along with the admin interface, the user can even update the Firmware manually. Thus, for manually updating the firmware, the users are suggested to follow the steps provided below.

  • In the beginning, the users are advised to connect the system to the router using an Ethernet cable.
  • After this, open a preferred web browser on the system.
  • Then the users are advised to visit Netgear’s official, i.e., routerlogin.com.
  • Wait for the official website to open properly.
  • After this, the users will be asked to enter the username and the password on the Netgear Router Login page.
  • After entering the login credentials, the users are recommended to hit on the “OK” option.
  • Then the dashboard of the Netgear Router’s website will open.
  • After that, hit on the “Advanced” option.
  • From there, the users are advised to tap on the “Administration” option.
  • Now click on the “Firmware Update” tab.
  • After this, the users are supposed to click on the “Check” option.
  • Then the latest firmware version and the New firmware version will get open.
  • After that, click on the “Yes” option.
  • Then the Netgear Router Firmware update procedure will begin.
  • Note: The users are suggested not to close the window while updating the Netgear router’s firmware. 
  • After this, the users are again supposed to enter the username and the password.
  • Then click on the “OK” option.
  • After that, the latest version of the Netgear firmware would display on the screen’s top right corner.
  • Then click on the latest firmware version and perform the on-screen steps to update it.

So, these were the instruction for Netgear Router Firmware Update Manually. After applying these steps, it would get easy for all users to update the firmware manually. However, if any user fails to update the firmware, they are advised to contact the professionals for assistance.

Netgear Router Firmware Update Using Netgear Genie Application

The users can also update the Netgear router firmware using the Netgear Genie application. So, scroll down and perform the steps provided below.

  • First of all, the users are suggested to download and install the Netgear Genie application on their device.
  • After this, open the application.
  • Then, go to the router settings.
  • After that, enter the credentials such as “username” and the “password.”
  • Then afterward, locate the Netgear Router update section.
  • Now from there, the users are recommended to check whether a new firmware update is available. If new firmware is available, the users can click on the “Next” button.
  • After that, click on the “Yes” button to start the update procedure.
  • So, after the update gets complete, the user will get redirected to the Netgear Genie’s settings page.
  • Now from there, the user can look for the latest firmware version.

So, it was all about the Netgear Router Firmware update procedure. However, if any user fails to update the firmware or encounters any difficulty, they must reach out to the experts for immediate assistance.

Add a Comment

Your email address will not be published. Required fields are marked *